III. Working With Graphs

F. F6 - Draw

From the graph window press to access the menu.

1: ClrDraw will clear the screen and regraph any functions that are entered in the Y=Editor.

2:DrawFunction is executed from the Home screen or from a program. Once a function is drawn, you can clear it by pressing (Regraph).

Enter the function shown on the Y=Editor. Press .
Graph using ZoomDec - 4.
Press to access the F6 menu. Select 2:DrawFunc.
You will be taken to the home screen where you can specify a function that you want drawn.
When you press ENTER, the new graph is drawn. This is a drawing only. You cannot use Math, or Trace, etc. on the graph.

3:DrawInv is executed from the Home screen or a program. It cannot be drawn from the Graph screen. The inverse will be a drawing. You cannot use Math, Trace, etc. on the drawing.

Enter the function shown on the Y=Editor. Press .
Graph using ZoomDec - 4.
Press to access the F6 menu. Select 3:DrawInv.
You will be taken to the home screen where you can specify a function that you want drawn.
When you press ENTER, the inverse is drawn. This is a drawing only. You cannot use Math, or Trace, etc. on the graph.

6:DrawSlp will draw a line through a designated point with a given slope. It is executed from the Home screen or a program and has the syntax: DrawSlp: x,y,slope

Tools	Zoom	Trace	Regraph
Math	Draw		Pen

I. Entering Graphs

II. Windows & Styles

III. Working with Graphs

IV. Special Graphs

V. Other Graph Modes